ABOUT US
DICO Energy is a comprehensive energy technology company specializing in oilfield cementing chemicals, crude oil pipeline drag reducers, oilfield power equipment, and oilfield technical services.
GET A FREE QUOTE
Error: Contact form not found.
-
Home
-
Products
-
Drag Reducing Agent
- OOD-S310 Drag Reducing Agent
OOD-S310 Drag Reducing Agent
The main ingredients of this product are EVA, specially screened surfactants, and mixed alcohol ether suspension. Easy to store and use.
The application process of emulsion type pour point depressant needs to add it to the oil pipeline at the front end of the heating furnace. The farther the distance is, the better the effect is.After emulsion type pour point depressant is mixed with oil products, there needs to be a dissolution process, due to its particle size is very small,the dissolution rate will be very fast. After dissolution, heat treatment is required, and the heat treatment temperature is usually above 15 ℃ at the wax precipitation point.During the transportation of heat-treated crude oil through long-distance pipelines, there will be good pour point and viscosity reduction effects.
The application process of emulsion type pour point depressant needs to add it to the oil pipeline at the front end of the heating furnace. The farther the distance is, the better the effect is.After emulsion type pour point depressant is mixed with oil products, there needs to be a dissolution process, due to its particle size is very small,the dissolution rate will be very fast. After dissolution, heat treatment is required, and the heat treatment temperature is usually above 15 ℃ at the wax precipitation point.During the transportation of heat-treated crude oil through long-distance pipelines, there will be good pour point and viscosity reduction effects.
-
Application Method
Solutions with a density of 0.87 +0.005 g/cubic centimeter (all of the solutions mentioned below are final solutions compounded with polymer powders) should be selected for compounding. It is required that the selected solution can not dissolve polymer powders, and the solution can form a suspension with polymer powders. The maximum amount of polymer powder added to the finished product of drag reducing agent per cubic meter is not more than 360 kg. The finished product should be used as soon as possible after compounding.
-
Packing
The solid drag reducer is packed in 15kg/carton, which conforms to the transport specifications.
-
Storage And Handling
Storage conditions of products require as much shade as possible, the best storage conditions: temperature from - 20℃ to 20℃, storage environment to avoid light. Limit storage temperature is -40℃~50℃. The closer the limit storage temperature is, or the higher the limit storage temperature is, the more likely it will destroy the physical form of drag reducer and lead to difficulty in using it.
Technical Data
| Test items | Executive standard | Technical parameters of products |
| Form | Visual measurement | Powder |
| Colour | Visual measurement | White |
| Smell | ―――――― | A slight hydrocarbon odor. |
| Solubility | ―――――― | Insoluble in water, soluble in hydrocarbon solvents and oils |
| Sampling | Gb/t 6679 | Sampling at 7 different locations was 2 g and 14 g, respectively. |
| Density | Gb/t 4472 | 0.82-0.98g/cm³ |
| Flash point (closed) ℃ | Atsm d7094 | ＞150 |
| Ph value | Ph test paper | 6-8 |
| Polymer content（％） | ―――――― | 60-90 |
| Rate of increase | Sy/t 6578 | ＞25 |
Note: The above data only represent the parameters of OOD-S310 regular crude oil & petroleum oil drag reducer. The technical parameters of different types of drag reducing agent will be slightly different.
OUR PRODUCTS
Best-selling Products
OOD-ZY01 Heavy Crude Oil Drag Reducing Agent
OOD-ZY01 Heavy Crude Oil Drag Reducing Agent
OOD-Y500 Drag Reducing Agent
OOD-Y500 Drag Reducing Agent
OOD-PPD-3 Pour Point Depressant
OOD-PPD-3 Pour Point Depressant
OOD-H500 Drag Reducing Agent
OOD-H500 Drag Reducing Agent
OOD-G350 Drag Reducing Agent
OOD-G350 Drag Reducing Agent
OOD-G350H Drag Reducing Agent
OOD-G350H Drag Reducing Agent
