The main components of the product are polyalkene polymer powder and mixed alcohol ether suspension. Easy to store and use.

Drag reducer is used in long-distance pipeline, only suitable for crude oil pipeline. The polymer produced by special process is suitable for the pipeline which can obtain higher effect of increasing / reducing drag by injecting more drag reducer, and the preservation environment is closer to the appropriate environment. This product is characterized by high flash point, over 93 ℃, almost no special smell, good environmental protection.The product is applicable to the oil temperature in the oil pipeline exceeding 20 ℃The usual filling concentration is ≥ 15ppm. By adding a small amount of friction reducing agent (ppm level) into the pipeline, the physical effect will be eliminated, the turbulence of high-speed fluid will be eliminated, the friction of the extended range will be reduced, and finally the purpose of increasing the pipeline transportation capacity and reducing the pipeline operation pressure will be achieved. The performance of the drag reducer is greatly affected by the pipeline working condition. The delivery rate of the drag reducer in the factory inspection only represents the data of the drag reducer on the factory's experimental pipeline. The actual value shall be subject to the local test data.